| | | @@ -0,0 +1,1196 @@ |
| 1 | + | ////////////////////////////////////////////////////////////////////// |
| 2 | + | // This file is part of Remere's Map Editor |
| 3 | + | ////////////////////////////////////////////////////////////////////// |
| 4 | + | // Remere's Map Editor is free software: you can redistribute it and/or modify |
| 5 | + | // it under the terms of the GNU General Public License as published by |
| 6 | + | // the Free Software Foundation, either version 3 of the License, or |
| 7 | + | // (at your option) any later version. |
| 8 | + | // |
| 9 | + | // Remere's Map Editor is distributed in the hope that it will be useful, |
| 10 | + | // but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 11 | + | // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 12 | + | // GNU General Public License for more details. |
| 13 | + | // |
| 14 | + | // You should have received a copy of the GNU General Public License |
| 15 | + | // along with this program. If not, see <http://www.gnu.org/licenses/>. |
| 16 | + | ////////////////////////////////////////////////////////////////////// |
| 17 | + | |
| 18 | + | #include "main.h" |
| 19 | + | #include "otmapgen_dialog.h" |
| 20 | + | #include "otmapgen.h" |
| 21 | + | #include "application.h" |
| 22 | + | #include "editor.h" |
| 23 | + | #include "settings.h" |
| 24 | + | #include "action.h" |
| 25 | + | #include "iomap.h" |
| 26 | + | #include "gui.h" |
| 27 | + | |
| 28 | + | #include <wx/process.h> |
| 29 | + | #include <wx/stream.h> |
| 30 | + | #include <wx/stdpaths.h> |
| 31 | + | #include <wx/filename.h> |
| 32 | + | #include <wx/dir.h> |
| 33 | + | |
| 34 | + | wxBEGIN_EVENT_TABLE(OTMapGenDialog, wxDialog) |
| 35 | + | EVT_BUTTON(ID_GENERATE, OTMapGenDialog::OnGenerate) |
| 36 | + | EVT_BUTTON(ID_PREVIEW, OTMapGenDialog::OnPreview) |
| 37 | + | EVT_BUTTON(wxID_CANCEL, OTMapGenDialog::OnCancel) |
| 38 | + | EVT_BUTTON(ID_FLOOR_UP, OTMapGenDialog::OnFloorUp) |
| 39 | + | EVT_BUTTON(ID_FLOOR_DOWN, OTMapGenDialog::OnFloorDown) |
| 40 | + | EVT_BUTTON(ID_ZOOM_IN, OTMapGenDialog::OnZoomIn) |
| 41 | + | EVT_BUTTON(ID_ZOOM_OUT, OTMapGenDialog::OnZoomOut) |
| 42 | + | EVT_TEXT(ID_SEED_TEXT, OTMapGenDialog::OnSeedChange) |
| 43 | + | EVT_SPINCTRL(ID_WIDTH_SPIN, OTMapGenDialog::OnParameterChange) |
| 44 | + | EVT_SPINCTRL(ID_HEIGHT_SPIN, OTMapGenDialog::OnParameterChange) |
| 45 | + | EVT_CHOICE(ID_VERSION_CHOICE, OTMapGenDialog::OnParameterChangeText) |
| 46 | + | EVT_CHOICE(ID_MOUNTAIN_TYPE_CHOICE, OTMapGenDialog::OnMountainTypeChange) |
| 47 | + | |
| 48 | + | // Terrain layer management events |
| 49 | + | EVT_LIST_ITEM_SELECTED(ID_TERRAIN_LAYER_LIST, OTMapGenDialog::OnTerrainLayerSelect) |
| 50 | + | EVT_BUTTON(ID_ADD_LAYER, OTMapGenDialog::OnTerrainLayerAdd) |
| 51 | + | EVT_BUTTON(ID_REMOVE_LAYER, OTMapGenDialog::OnTerrainLayerRemove) |
| 52 | + | EVT_BUTTON(ID_MOVE_UP_LAYER, OTMapGenDialog::OnTerrainLayerMoveUp) |
| 53 | + | EVT_BUTTON(ID_MOVE_DOWN_LAYER, OTMapGenDialog::OnTerrainLayerMoveDown) |
| 54 | + | EVT_BUTTON(ID_EDIT_LAYER, OTMapGenDialog::OnTerrainLayerEdit) |
| 55 | + | EVT_CHOICE(ID_LAYER_BRUSH_CHOICE, OTMapGenDialog::OnBrushChoice) |
| 56 | + | EVT_COMMAND(ID_LAYER_ITEM_ID_SPIN, wxEVT_COMMAND_SPINCTRL_UPDATED, OTMapGenDialog::OnItemIdChange) |
| 57 | + | EVT_CHOICE(ID_CAVE_BRUSH_CHOICE, OTMapGenDialog::OnBrushChoice) |
| 58 | + | EVT_COMMAND(ID_CAVE_ITEM_ID_SPIN, wxEVT_COMMAND_SPINCTRL_UPDATED, OTMapGenDialog::OnItemIdChange) |
| 59 | + | EVT_CHOICE(ID_WATER_BRUSH_CHOICE, OTMapGenDialog::OnBrushChoice) |
| 60 | + | EVT_COMMAND(ID_WATER_ITEM_ID_SPIN, wxEVT_COMMAND_SPINCTRL_UPDATED, OTMapGenDialog::OnItemIdChange) |
| 61 | + | wxEND_EVENT_TABLE() |
| 62 | + | |
| 63 | + | OTMapGenDialog::OTMapGenDialog(wxWindow* parent) : |
| 64 | + | wxDialog(parent, wxID_ANY, "Procedural Map Generator", wxDefaultPosition, wxSize(1000, 700), wxDEFAULT_DIALOG_STYLE | wxRESIZE_BORDER), |
| 65 | + | current_preview(nullptr), |
| 66 | + | current_preview_floor(7), // Start with ground level (floor 7) |
| 67 | + | current_zoom(1.0), |
| 68 | + | preview_offset_x(0), |
| 69 | + | preview_offset_y(0) { |
| 70 | + | |
| 71 | + | // Create main sizer |
| 72 | + | wxBoxSizer* main_sizer = new wxBoxSizer(wxVERTICAL); |
| 73 | + | |
| 74 | + | // Create notebook for tabs |
| 75 | + | wxNotebook* notebook = new wxNotebook(this, wxID_ANY); |
| 76 | + | |
| 77 | + | // === Main Settings Tab (merged basic + advanced) === |
| 78 | + | wxPanel* main_panel = new wxPanel(notebook); |
| 79 | + | wxBoxSizer* settings_main_sizer = new wxBoxSizer(wxHORIZONTAL); |
| 80 | + | |
| 81 | + | // Left side - All Settings |
| 82 | + | wxBoxSizer* left_main_sizer = new wxBoxSizer(wxVERTICAL); |
| 83 | + | |
| 84 | + | // Basic parameters group (more compact) |
| 85 | + | wxStaticBoxSizer* basic_params_sizer = new wxStaticBoxSizer(wxVERTICAL, main_panel, "Basic Parameters"); |
| 86 | + | wxFlexGridSizer* basic_grid_sizer = new wxFlexGridSizer(3, 4, 5, 5); |
| 87 | + | basic_grid_sizer->AddGrowableCol(1); |
| 88 | + | basic_grid_sizer->AddGrowableCol(3); |
| 89 | + | |
| 90 | + | // Row 1: Seed and Width |
| 91 | + | basic_grid_sizer->Add(new wxStaticText(main_panel, wxID_ANY, "Seed:"), 0, wxALIGN_CENTER_VERTICAL); |
| 92 | + | seed_text_ctrl = new wxTextCtrl(main_panel, ID_SEED_TEXT, wxString::Format("%lld", (long long)time(nullptr) * 1000)); |
| 93 | + | seed_text_ctrl->SetToolTip("Enter any integer value (supports 64-bit seeds)"); |
| 94 | + | basic_grid_sizer->Add(seed_text_ctrl, 1, wxEXPAND); |
| 95 | + | |
| 96 | + | basic_grid_sizer->Add(new wxStaticText(main_panel, wxID_ANY, "Width:"), 0, wxALIGN_CENTER_VERTICAL); |
| 97 | + | width_spin_ctrl = new wxSpinCtrl(main_panel, ID_WIDTH_SPIN, "256", wxDefaultPosition, wxDefaultSize, wxSP_ARROW_KEYS, 64, 2048, 256); |
| 98 | + | basic_grid_sizer->Add(width_spin_ctrl, 1, wxEXPAND); |
| 99 | + | |
| 100 | + | // Row 2: Version and Height |
| 101 | + | basic_grid_sizer->Add(new wxStaticText(main_panel, wxID_ANY, "Version:"), 0, wxALIGN_CENTER_VERTICAL); |
| 102 | + | wxArrayString versions; |
| 103 | + | versions.Add("10.98"); |
| 104 | + | versions.Add("11.00"); |
| 105 | + | versions.Add("12.00"); |
| 106 | + | version_choice = new wxChoice(main_panel, ID_VERSION_CHOICE, wxDefaultPosition, wxDefaultSize, versions); |
| 107 | + | version_choice->SetSelection(0); |
| 108 | + | basic_grid_sizer->Add(version_choice, 1, wxEXPAND); |
| 109 | + | |
| 110 | + | basic_grid_sizer->Add(new wxStaticText(main_panel, wxID_ANY, "Height:"), 0, wxALIGN_CENTER_VERTICAL); |
| 111 | + | height_spin_ctrl = new wxSpinCtrl(main_panel, ID_HEIGHT_SPIN, "256", wxDefaultPosition, wxDefaultSize, wxSP_ARROW_KEYS, 64, 2048, 256); |
| 112 | + | basic_grid_sizer->Add(height_spin_ctrl, 1, wxEXPAND); |
| 113 | + | |
| 114 | + | // Row 3: Mountain Type and Water Level |
| 115 | + | basic_grid_sizer->Add(new wxStaticText(main_panel, wxID_ANY, "Mountain Type:"), 0, wxALIGN_CENTER_VERTICAL); |
| 116 | + | wxArrayString mountain_types; |
| 117 | + | mountain_types.Add("MOUNTAIN"); |
| 118 | + | mountain_types.Add("SNOW"); |
| 119 | + | mountain_types.Add("SAND"); |
| 120 | + | mountain_type_choice = new wxChoice(main_panel, ID_MOUNTAIN_TYPE_CHOICE, wxDefaultPosition, wxDefaultSize, mountain_types); |
| 121 | + | mountain_type_choice->SetSelection(0); |
| 122 | + | basic_grid_sizer->Add(mountain_type_choice, 1, wxEXPAND); |
| 123 | + | |
| 124 | + | basic_grid_sizer->Add(new wxStaticText(main_panel, wxID_ANY, "Water Level:"), 0, wxALIGN_CENTER_VERTICAL); |
| 125 | + | water_level_text = new wxTextCtrl(main_panel, ID_WATER_LEVEL_TEXT, "7"); |
| 126 | + | water_level_text->SetToolTip("Tibia Z-coordinate (0-15, 7 = ground level)"); |
| 127 | + | basic_grid_sizer->Add(water_level_text, 1, wxEXPAND); |
| 128 | + | |
| 129 | + | basic_params_sizer->Add(basic_grid_sizer, 0, wxEXPAND | wxALL, 5); |
| 130 | + | |
| 131 | + | // Checkboxes in horizontal layout |
| 132 | + | wxBoxSizer* checkbox_sizer = new wxBoxSizer(wxHORIZONTAL); |
| 133 | + | terrain_only_checkbox = new wxCheckBox(main_panel, wxID_ANY, "Terrain Only"); |
| 134 | + | sand_biome_checkbox = new wxCheckBox(main_panel, wxID_ANY, "Sand Biome"); |
| 135 | + | sand_biome_checkbox->SetValue(true); |
| 136 | + | smooth_coastline_checkbox = new wxCheckBox(main_panel, wxID_ANY, "Smooth Coastlines"); |
| 137 | + | smooth_coastline_checkbox->SetValue(true); |
| 138 | + | add_caves_checkbox = new wxCheckBox(main_panel, wxID_ANY, "Underground Caves"); |
| 139 | + | add_caves_checkbox->SetValue(true); |
| 140 | + | |
| 141 | + | checkbox_sizer->Add(terrain_only_checkbox, 0, wxALL, 5); |
| 142 | + | checkbox_sizer->Add(sand_biome_checkbox, 0, wxALL, 5); |
| 143 | + | checkbox_sizer->Add(smooth_coastline_checkbox, 0, wxALL, 5); |
| 144 | + | checkbox_sizer->Add(add_caves_checkbox, 0, wxALL, 5); |
| 145 | + | |
| 146 | + | basic_params_sizer->Add(checkbox_sizer, 0, wxEXPAND | wxALL, 5); |
| 147 | + | left_main_sizer->Add(basic_params_sizer, 0, wxEXPAND | wxALL, 5); |
| 148 | + | |
| 149 | + | // Advanced parameters group (more compact) |
| 150 | + | wxStaticBoxSizer* advanced_params_sizer = new wxStaticBoxSizer(wxVERTICAL, main_panel, "Noise & Generation Parameters"); |
| 151 | + | wxFlexGridSizer* advanced_grid_sizer = new wxFlexGridSizer(4, 4, 5, 5); |
| 152 | + | advanced_grid_sizer->AddGrowableCol(1); |
| 153 | + | advanced_grid_sizer->AddGrowableCol(3); |
| 154 | + | |
| 155 | + | // Row 1: Noise Increment and Island Distance |
| 156 | + | advanced_grid_sizer->Add(new wxStaticText(main_panel, wxID_ANY, "Noise Increment:"), 0, wxALIGN_CENTER_VERTICAL); |
| 157 | + | noise_increment_text = new wxTextCtrl(main_panel, ID_NOISE_INCREMENT_TEXT, "1.0"); |
| 158 | + | noise_increment_text->SetToolTip("Range: 0.001 - 100.0 (higher = more detail)"); |
| 159 | + | advanced_grid_sizer->Add(noise_increment_text, 1, wxEXPAND); |
| 160 | + | |
| 161 | + | advanced_grid_sizer->Add(new wxStaticText(main_panel, wxID_ANY, "Island Distance:"), 0, wxALIGN_CENTER_VERTICAL); |
| 162 | + | island_distance_text = new wxTextCtrl(main_panel, ID_ISLAND_DISTANCE_TEXT, "0.92"); |
| 163 | + | island_distance_text->SetToolTip("Range: 0.001 - 100.0 (lower = more island effect)"); |
| 164 | + | advanced_grid_sizer->Add(island_distance_text, 1, wxEXPAND); |
| 165 | + | |
| 166 | + | // Row 2: Exponent and Linear |
| 167 | + | advanced_grid_sizer->Add(new wxStaticText(main_panel, wxID_ANY, "Exponent:"), 0, wxALIGN_CENTER_VERTICAL); |
| 168 | + | exponent_text = new wxTextCtrl(main_panel, ID_EXPONENT_TEXT, "1.4"); |
| 169 | + | exponent_text->SetToolTip("Range: 0.001 - 100.0 (height curve shaping)"); |
| 170 | + | advanced_grid_sizer->Add(exponent_text, 1, wxEXPAND); |
| 171 | + | |
| 172 | + | advanced_grid_sizer->Add(new wxStaticText(main_panel, wxID_ANY, "Linear:"), 0, wxALIGN_CENTER_VERTICAL); |
| 173 | + | linear_text = new wxTextCtrl(main_panel, ID_LINEAR_TEXT, "6.0"); |
| 174 | + | linear_text->SetToolTip("Range: 0.001 - 100.0 (height multiplier)"); |
| 175 | + | advanced_grid_sizer->Add(linear_text, 1, wxEXPAND); |
| 176 | + | |
| 177 | + | // Row 3: Cave Depth and Cave Roughness |
| 178 | + | advanced_grid_sizer->Add(new wxStaticText(main_panel, wxID_ANY, "Cave Depth:"), 0, wxALIGN_CENTER_VERTICAL); |
| 179 | + | cave_depth_text = new wxTextCtrl(main_panel, ID_CAVE_DEPTH_TEXT, "20"); |
| 180 | + | cave_depth_text->SetToolTip("Range: 1 - 100 (number of underground floors)"); |
| 181 | + | advanced_grid_sizer->Add(cave_depth_text, 1, wxEXPAND); |
| 182 | + | |
| 183 | + | advanced_grid_sizer->Add(new wxStaticText(main_panel, wxID_ANY, "Cave Roughness:"), 0, wxALIGN_CENTER_VERTICAL); |
| 184 | + | cave_roughness_text = new wxTextCtrl(main_panel, ID_CAVE_ROUGHNESS_TEXT, "0.45"); |
| 185 | + | cave_roughness_text->SetToolTip("Range: 0.001 - 100.0 (noise scale for caves)"); |
| 186 | + | advanced_grid_sizer->Add(cave_roughness_text, 1, wxEXPAND); |
| 187 | + | |
| 188 | + | // Row 4: Cave Chance (spanning two columns) |
| 189 | + | advanced_grid_sizer->Add(new wxStaticText(main_panel, wxID_ANY, "Cave Chance:"), 0, wxALIGN_CENTER_VERTICAL); |
| 190 | + | cave_chance_text = new wxTextCtrl(main_panel, ID_CAVE_CHANCE_TEXT, "0.09"); |
| 191 | + | cave_chance_text->SetToolTip("Range: 0.001 - 1.0 (probability of cave generation)"); |
| 192 | + | advanced_grid_sizer->Add(cave_chance_text, 1, wxEXPAND); |
| 193 | + | |
| 194 | + | // Add spacers for the remaining cells |
| 195 | + | advanced_grid_sizer->Add(new wxStaticText(main_panel, wxID_ANY, ""), 0); |
| 196 | + | advanced_grid_sizer->Add(new wxStaticText(main_panel, wxID_ANY, ""), 0); |
| 197 | + | |
| 198 | + | advanced_params_sizer->Add(advanced_grid_sizer, 0, wxEXPAND | wxALL, 5); |
| 199 | + | left_main_sizer->Add(advanced_params_sizer, 0, wxEXPAND | wxALL, 5); |
| 200 | + | |
| 201 | + | // Right side - Large Preview section |
| 202 | + | wxBoxSizer* right_main_sizer = new wxBoxSizer(wxVERTICAL); |
| 203 | + | |
| 204 | + | wxStaticBoxSizer* preview_sizer = new wxStaticBoxSizer(wxVERTICAL, main_panel, "Map Preview"); |
| 205 | + | preview_bitmap = new wxStaticBitmap(main_panel, wxID_ANY, wxBitmap(400, 400)); |
| 206 | + | preview_bitmap->SetBackgroundColour(*wxBLACK); |
| 207 | + | preview_bitmap->SetMinSize(wxSize(400, 400)); |
| 208 | + | preview_sizer->Add(preview_bitmap, 1, wxEXPAND | wxALL, 5); |
| 209 | + | |
| 210 | + | // Floor navigation |
| 211 | + | wxBoxSizer* floor_nav_sizer = new wxBoxSizer(wxHORIZONTAL); |
| 212 | + | floor_down_button = new wxButton(main_panel, ID_FLOOR_DOWN, "Floor -"); |
| 213 | + | floor_label = new wxStaticText(main_panel, wxID_ANY, "Floor: 7 (Ground)"); |
| 214 | + | floor_up_button = new wxButton(main_panel, ID_FLOOR_UP, "Floor +"); |
| 215 | + | |
| 216 | + | floor_nav_sizer->Add(floor_down_button, 0, wxALL, 2); |
| 217 | + | floor_nav_sizer->AddStretchSpacer(); |
| 218 | + | floor_nav_sizer->Add(floor_label, 0, wxALIGN_CENTER_VERTICAL | wxALL, 2); |
| 219 | + | floor_nav_sizer->AddStretchSpacer(); |
| 220 | + | floor_nav_sizer->Add(floor_up_button, 0, wxALL, 2); |
| 221 | + | |
| 222 | + | preview_sizer->Add(floor_nav_sizer, 0, wxEXPAND | wxALL, 5); |
| 223 | + | |
| 224 | + | // Zoom navigation |
| 225 | + | wxBoxSizer* zoom_nav_sizer = new wxBoxSizer(wxHORIZONTAL); |
| 226 | + | zoom_out_button = new wxButton(main_panel, ID_ZOOM_OUT, "Zoom -"); |
| 227 | + | zoom_label = new wxStaticText(main_panel, wxID_ANY, "Zoom: 100%"); |
| 228 | + | zoom_in_button = new wxButton(main_panel, ID_ZOOM_IN, "Zoom +"); |
| 229 | + | |
| 230 | + | zoom_nav_sizer->Add(zoom_out_button, 0, wxALL, 2); |
| 231 | + | zoom_nav_sizer->AddStretchSpacer(); |
| 232 | + | zoom_nav_sizer->Add(zoom_label, 0, wxALIGN_CENTER_VERTICAL | wxALL, 2); |
| 233 | + | zoom_nav_sizer->AddStretchSpacer(); |
| 234 | + | zoom_nav_sizer->Add(zoom_in_button, 0, wxALL, 2); |
| 235 | + | |
| 236 | + | preview_sizer->Add(zoom_nav_sizer, 0, wxEXPAND | wxALL, 5); |
| 237 | + | |
| 238 | + | // Preview buttons |
| 239 | + | wxBoxSizer* preview_buttons_sizer = new wxBoxSizer(wxHORIZONTAL); |
| 240 | + | preview_button = new wxButton(main_panel, ID_PREVIEW, "Generate Preview"); |
| 241 | + | wxButton* refresh_preview_button = new wxButton(main_panel, ID_PREVIEW, "Refresh"); |
| 242 | + | |
| 243 | + | preview_buttons_sizer->Add(preview_button, 1, wxEXPAND | wxALL, 2); |
| 244 | + | preview_buttons_sizer->Add(refresh_preview_button, 0, wxALL, 2); |
| 245 | + | |
| 246 | + | preview_sizer->Add(preview_buttons_sizer, 0, wxEXPAND | wxALL, 5); |
| 247 | + | |
| 248 | + | right_main_sizer->Add(preview_sizer, 1, wxEXPAND | wxALL, 5); |
| 249 | + | |
| 250 | + | // Add left and right sides to main tab |
| 251 | + | settings_main_sizer->Add(left_main_sizer, 0, wxEXPAND | wxALL, 5); |
| 252 | + | settings_main_sizer->Add(right_main_sizer, 1, wxEXPAND | wxALL, 5); |
| 253 | + | |
| 254 | + | main_panel->SetSizer(settings_main_sizer); |
| 255 | + | notebook->AddPage(main_panel, "Map Generation", true); |
| 256 | + | |
| 257 | + | // === Layout Design Tab === |
| 258 | + | wxPanel* layout_panel = new wxPanel(notebook); |
| 259 | + | wxBoxSizer* layout_sizer = new wxBoxSizer(wxVERTICAL); |
| 260 | + | |
| 261 | + | // Terrain Layers section |
| 262 | + | wxStaticBoxSizer* terrain_layers_sizer = new wxStaticBoxSizer(wxHORIZONTAL, layout_panel, "Terrain Layers"); |
| 263 | + | |
| 264 | + | // Terrain layer list |
| 265 | + | terrain_layer_list = new wxListCtrl(layout_panel, ID_TERRAIN_LAYER_LIST, wxDefaultPosition, wxSize(300, 200), |
| 266 | + | wxLC_REPORT | wxLC_SINGLE_SEL); |
| 267 | + | terrain_layer_list->InsertColumn(0, "Name", wxLIST_FORMAT_LEFT, 100); |
| 268 | + | terrain_layer_list->InsertColumn(1, "Brush", wxLIST_FORMAT_LEFT, 100); |
| 269 | + | terrain_layer_list->InsertColumn(2, "Item ID", wxLIST_FORMAT_LEFT, 60); |
| 270 | + | terrain_layer_list->InsertColumn(3, "Height", wxLIST_FORMAT_LEFT, 80); |
| 271 | + | terrain_layer_list->InsertColumn(4, "Enabled", wxLIST_FORMAT_LEFT, 60); |
| 272 | + | |
| 273 | + | terrain_layers_sizer->Add(terrain_layer_list, 1, wxEXPAND | wxALL, 5); |
| 274 | + | |
| 275 | + | // Layer control buttons |
| 276 | + | wxBoxSizer* layer_buttons_sizer = new wxBoxSizer(wxVERTICAL); |
| 277 | + | add_layer_button = new wxButton(layout_panel, ID_ADD_LAYER, "Add Layer"); |
| 278 | + | remove_layer_button = new wxButton(layout_panel, ID_REMOVE_LAYER, "Remove Layer"); |
| 279 | + | move_up_button = new wxButton(layout_panel, ID_MOVE_UP_LAYER, "Move Up"); |
| 280 | + | move_down_button = new wxButton(layout_panel, ID_MOVE_DOWN_LAYER, "Move Down"); |
| 281 | + | edit_layer_button = new wxButton(layout_panel, ID_EDIT_LAYER, "Edit Layer"); |
| 282 | + | |
| 283 | + | layer_buttons_sizer->Add(add_layer_button, 0, wxEXPAND | wxALL, 2); |
| 284 | + | layer_buttons_sizer->Add(remove_layer_button, 0, wxEXPAND | wxALL, 2); |
| 285 | + | layer_buttons_sizer->Add(move_up_button, 0, wxEXPAND | wxALL, 2); |
| 286 | + | layer_buttons_sizer->Add(move_down_button, 0, wxEXPAND | wxALL, 2); |
| 287 | + | layer_buttons_sizer->Add(edit_layer_button, 0, wxEXPAND | wxALL, 2); |
| 288 | + | layer_buttons_sizer->AddStretchSpacer(); |
| 289 | + | |
| 290 | + | terrain_layers_sizer->Add(layer_buttons_sizer, 0, wxEXPAND | wxALL, 5); |
| 291 | + | |
| 292 | + | // Layer Properties section |
| 293 | + | wxStaticBoxSizer* layer_props_sizer = new wxStaticBoxSizer(wxVERTICAL, layout_panel, "Layer Properties"); |
| 294 | + | layer_properties_panel = new wxPanel(layout_panel); |
| 295 | + | wxFlexGridSizer* props_grid_sizer = new wxFlexGridSizer(5, 4, 5, 10); |
| 296 | + | props_grid_sizer->AddGrowableCol(1); |
| 297 | + | props_grid_sizer->AddGrowableCol(3); |
| 298 | + | |
| 299 | + | // Row 1: Name and Brush |
| 300 | + | props_grid_sizer->Add(new wxStaticText(layer_properties_panel, wxID_ANY, "Name:"), 0, wxALIGN_CENTER_VERTICAL); |
| 301 | + | layer_name_text = new wxTextCtrl(layer_properties_panel, wxID_ANY, ""); |
| 302 | + | props_grid_sizer->Add(layer_name_text, 1, wxEXPAND); |
| 303 | + | |
| 304 | + | props_grid_sizer->Add(new wxStaticText(layer_properties_panel, wxID_ANY, "Brush:"), 0, wxALIGN_CENTER_VERTICAL); |
| 305 | + | layer_brush_choice = new wxChoice(layer_properties_panel, ID_LAYER_BRUSH_CHOICE); |
| 306 | + | props_grid_sizer->Add(layer_brush_choice, 1, wxEXPAND); |
| 307 | + | |
| 308 | + | // Row 2: Item ID and Z-Order |
| 309 | + | props_grid_sizer->Add(new wxStaticText(layer_properties_panel, wxID_ANY, "Item ID:"), 0, wxALIGN_CENTER_VERTICAL); |
| 310 | + | layer_item_id_spin = new wxSpinCtrl(layer_properties_panel, ID_LAYER_ITEM_ID_SPIN, "100", wxDefaultPosition, wxDefaultSize, wxSP_ARROW_KEYS, 100, 65535, 100); |
| 311 | + | props_grid_sizer->Add(layer_item_id_spin, 1, wxEXPAND); |
| 312 | + | |
| 313 | + | props_grid_sizer->Add(new wxStaticText(layer_properties_panel, wxID_ANY, "Z-Order:"), 0, wxALIGN_CENTER_VERTICAL); |
| 314 | + | z_order_spin = new wxSpinCtrl(layer_properties_panel, wxID_ANY, "1000", wxDefaultPosition, wxDefaultSize, wxSP_ARROW_KEYS, 0, 10000, 1000); |
| 315 | + | props_grid_sizer->Add(z_order_spin, 1, wxEXPAND); |
| 316 | + | |
| 317 | + | // Row 3: Height range |
| 318 | + | props_grid_sizer->Add(new wxStaticText(layer_properties_panel, wxID_ANY, "Height Min:"), 0, wxALIGN_CENTER_VERTICAL); |
| 319 | + | height_min_text = new wxTextCtrl(layer_properties_panel, wxID_ANY, "0.0"); |
| 320 | + | props_grid_sizer->Add(height_min_text, 1, wxEXPAND); |
| 321 | + | |
| 322 | + | props_grid_sizer->Add(new wxStaticText(layer_properties_panel, wxID_ANY, "Height Max:"), 0, wxALIGN_CENTER_VERTICAL); |
| 323 | + | height_max_text = new wxTextCtrl(layer_properties_panel, wxID_ANY, "1.0"); |
| 324 | + | props_grid_sizer->Add(height_max_text, 1, wxEXPAND); |
| 325 | + | |
| 326 | + | // Row 4: Moisture range |
| 327 | + | props_grid_sizer->Add(new wxStaticText(layer_properties_panel, wxID_ANY, "Moisture Min:"), 0, wxALIGN_CENTER_VERTICAL); |
| 328 | + | moisture_min_text = new wxTextCtrl(layer_properties_panel, wxID_ANY, "-1.0"); |
| 329 | + | props_grid_sizer->Add(moisture_min_text, 1, wxEXPAND); |
| 330 | + | |
| 331 | + | props_grid_sizer->Add(new wxStaticText(layer_properties_panel, wxID_ANY, "Moisture Max:"), 0, wxALIGN_CENTER_VERTICAL); |
| 332 | + | moisture_max_text = new wxTextCtrl(layer_properties_panel, wxID_ANY, "1.0"); |
| 333 | + | props_grid_sizer->Add(moisture_max_text, 1, wxEXPAND); |
| 334 | + | |
| 335 | + | // Row 5: Noise scale and Coverage |
| 336 | + | props_grid_sizer->Add(new wxStaticText(layer_properties_panel, wxID_ANY, "Noise Scale:"), 0, wxALIGN_CENTER_VERTICAL); |
| 337 | + | noise_scale_text = new wxTextCtrl(layer_properties_panel, wxID_ANY, "1.0"); |
| 338 | + | props_grid_sizer->Add(noise_scale_text, 1, wxEXPAND); |
| 339 | + | |
| 340 | + | props_grid_sizer->Add(new wxStaticText(layer_properties_panel, wxID_ANY, "Coverage:"), 0, wxALIGN_CENTER_VERTICAL); |
| 341 | + | coverage_text = new wxTextCtrl(layer_properties_panel, wxID_ANY, "1.0"); |
| 342 | + | props_grid_sizer->Add(coverage_text, 1, wxEXPAND); |
| 343 | + | |
| 344 | + | layer_properties_panel->SetSizer(props_grid_sizer); |
| 345 | + | layer_props_sizer->Add(layer_properties_panel, 1, wxEXPAND | wxALL, 5); |
| 346 | + | |
| 347 | + | // Checkboxes for layer options |
| 348 | + | wxBoxSizer* layer_options_sizer = new wxBoxSizer(wxHORIZONTAL); |
| 349 | + | use_borders_checkbox = new wxCheckBox(layout_panel, wxID_ANY, "Use Borders"); |
| 350 | + | use_borders_checkbox->SetValue(true); |
| 351 | + | layer_enabled_checkbox = new wxCheckBox(layout_panel, wxID_ANY, "Layer Enabled"); |
| 352 | + | layer_enabled_checkbox->SetValue(true); |
| 353 | + | |
| 354 | + | layer_options_sizer->Add(use_borders_checkbox, 0, wxALL, 5); |
| 355 | + | layer_options_sizer->Add(layer_enabled_checkbox, 0, wxALL, 5); |
| 356 | + | layer_props_sizer->Add(layer_options_sizer, 0, wxEXPAND | wxALL, 5); |
| 357 | + | |
| 358 | + | layout_sizer->Add(layer_props_sizer, 0, wxEXPAND | wxALL, 5); |
| 359 | + | |
| 360 | + | // Cave and Water Configuration section |
| 361 | + | wxStaticBoxSizer* special_terrain_sizer = new wxStaticBoxSizer(wxHORIZONTAL, layout_panel, "Cave & Water Configuration"); |
| 362 | + | |
| 363 | + | // Cave configuration |
| 364 | + | wxBoxSizer* cave_config_sizer = new wxBoxSizer(wxVERTICAL); |
| 365 | + | cave_config_sizer->Add(new wxStaticText(layout_panel, wxID_ANY, "Cave Configuration"), 0, wxALL, 2); |
| 366 | + | |
| 367 | + | wxFlexGridSizer* cave_grid_sizer = new wxFlexGridSizer(2, 2, 5, 10); |
| 368 | + | cave_grid_sizer->AddGrowableCol(1); |
| 369 | + | |
| 370 | + | cave_grid_sizer->Add(new wxStaticText(layout_panel, wxID_ANY, "Cave Brush:"), 0, wxALIGN_CENTER_VERTICAL); |
| 371 | + | cave_brush_choice = new wxChoice(layout_panel, ID_CAVE_BRUSH_CHOICE); |
| 372 | + | cave_grid_sizer->Add(cave_brush_choice, 1, wxEXPAND); |
| 373 | + | |
| 374 | + | cave_grid_sizer->Add(new wxStaticText(layout_panel, wxID_ANY, "Cave Item ID:"), 0, wxALIGN_CENTER_VERTICAL); |
| 375 | + | cave_item_id_spin = new wxSpinCtrl(layout_panel, ID_CAVE_ITEM_ID_SPIN, "351", wxDefaultPosition, wxDefaultSize, wxSP_ARROW_KEYS, 100, 65535, 351); |
| 376 | + | cave_grid_sizer->Add(cave_item_id_spin, 1, wxEXPAND); |
| 377 | + | |
| 378 | + | cave_config_sizer->Add(cave_grid_sizer, 0, wxEXPAND | wxALL, 5); |
| 379 | + | special_terrain_sizer->Add(cave_config_sizer, 1, wxEXPAND | wxALL, 5); |
| 380 | + | |
| 381 | + | // Water configuration |
| 382 | + | wxBoxSizer* water_config_sizer = new wxBoxSizer(wxVERTICAL); |
| 383 | + | water_config_sizer->Add(new wxStaticText(layout_panel, wxID_ANY, "Water Configuration"), 0, wxALL, 2); |
| 384 | + | |
| 385 | + | wxFlexGridSizer* water_grid_sizer = new wxFlexGridSizer(2, 2, 5, 10); |
| 386 | + | water_grid_sizer->AddGrowableCol(1); |
| 387 | + | |
| 388 | + | water_grid_sizer->Add(new wxStaticText(layout_panel, wxID_ANY, "Water Brush:"), 0, wxALIGN_CENTER_VERTICAL); |
| 389 | + | water_brush_choice = new wxChoice(layout_panel, ID_WATER_BRUSH_CHOICE); |
| 390 | + | water_grid_sizer->Add(water_brush_choice, 1, wxEXPAND); |
| 391 | + | |
| 392 | + | water_grid_sizer->Add(new wxStaticText(layout_panel, wxID_ANY, "Water Item ID:"), 0, wxALIGN_CENTER_VERTICAL); |
| 393 | + | water_item_id_spin = new wxSpinCtrl(layout_panel, ID_WATER_ITEM_ID_SPIN, "4608", wxDefaultPosition, wxDefaultSize, wxSP_ARROW_KEYS, 100, 65535, 4608); |
| 394 | + | water_grid_sizer->Add(water_item_id_spin, 1, wxEXPAND); |
| 395 | + | |
| 396 | + | water_config_sizer->Add(water_grid_sizer, 0, wxEXPAND | wxALL, 5); |
| 397 | + | special_terrain_sizer->Add(water_config_sizer, 1, wxEXPAND | wxALL, 5); |
| 398 | + | |
| 399 | + | layout_sizer->Add(special_terrain_sizer, 0, wxEXPAND | wxALL, 5); |
| 400 | + | layout_sizer->Add(terrain_layers_sizer, 1, wxEXPAND | wxALL, 5); |
| 401 | + | |
| 402 | + | layout_panel->SetSizer(layout_sizer); |
| 403 | + | notebook->AddPage(layout_panel, "Layout Design", false); |
| 404 | + | |
| 405 | + | main_sizer->Add(notebook, 1, wxEXPAND | wxALL, 5); |
| 406 | + | |
| 407 | + | // Buttons |
| 408 | + | wxBoxSizer* button_sizer = new wxBoxSizer(wxHORIZONTAL); |
| 409 | + | generate_button = new wxButton(this, ID_GENERATE, "Generate Map"); |
| 410 | + | cancel_button = new wxButton(this, wxID_CANCEL, "Cancel"); |
| 411 | + | |
| 412 | + | button_sizer->Add(generate_button, 0, wxALL, 5); |
| 413 | + | button_sizer->AddStretchSpacer(); |
| 414 | + | button_sizer->Add(cancel_button, 0, wxALL, 5); |
| 415 | + | |
| 416 | + | main_sizer->Add(button_sizer, 0, wxEXPAND | wxALL, 5); |
| 417 | + | |
| 418 | + | SetSizer(main_sizer); |
| 419 | + | Center(); |
| 420 | + | |
| 421 | + | // Initialize terrain layers and brush choices |
| 422 | + | PopulateBrushChoices(); |
| 423 | + | |
| 424 | + | // Initialize default terrain layers |
| 425 | + | GenerationConfig defaultConfig; |
| 426 | + | defaultConfig.initializeDefaultLayers(); |
| 427 | + | working_terrain_layers = defaultConfig.terrain_layers; |
| 428 | + | |
| 429 | + | // Populate the terrain layer list |
| 430 | + | PopulateTerrainLayerList(); |
| 431 | + | |
| 432 | + | // Initially disable layer property controls |
| 433 | + | UpdateLayerControls(); |
| 434 | + | |
| 435 | + | // Generate initial random 64-bit seed |
| 436 | + | srand(time(nullptr)); |
| 437 | + | long long initial_seed = ((long long)rand() << 32) | rand(); |
| 438 | + | seed_text_ctrl->SetValue(wxString::Format("%lld", initial_seed)); |
| 439 | + | } |
| 440 | + | |
| 441 | + | OTMapGenDialog::~OTMapGenDialog() { |
| 442 | + | if (current_preview) { |
| 443 | + | delete current_preview; |
| 444 | + | } |
| 445 | + | } |
| 446 | + | |
| 447 | + | void OTMapGenDialog::OnGenerate(wxCommandEvent& event) { |
| 448 | + | if (GenerateMap()) { |
| 449 | + | EndModal(wxID_OK); |
| 450 | + | } |
| 451 | + | } |
| 452 | + | |
| 453 | + | void OTMapGenDialog::OnCancel(wxCommandEvent& event) { |
| 454 | + | EndModal(wxID_CANCEL); |
| 455 | + | } |
| 456 | + | |
| 457 | + | void OTMapGenDialog::OnPreview(wxCommandEvent& event) { |
| 458 | + | UpdatePreview(); |
| 459 | + | } |
| 460 | + | |
| 461 | + | void OTMapGenDialog::OnSeedChange(wxCommandEvent& event) { |
| 462 | + | // Optional: Auto-update preview when seed changes |
| 463 | + | } |
| 464 | + | |
| 465 | + | void OTMapGenDialog::OnParameterChange(wxSpinEvent& event) { |
| 466 | + | // Optional: Auto-update preview when parameters change |
| 467 | + | } |
| 468 | + | |
| 469 | + | void OTMapGenDialog::OnParameterChangeText(wxCommandEvent& event) { |
| 470 | + | // Optional: Auto-update preview when parameters change |
| 471 | + | } |
| 472 | + | |
| 473 | + | void OTMapGenDialog::OnMountainTypeChange(wxCommandEvent& event) { |
| 474 | + | // Optional: Auto-update preview when mountain type changes |
| 475 | + | } |
| 476 | + | |
| 477 | + | void OTMapGenDialog::OnFloorUp(wxCommandEvent& event) { |
| 478 | + | if (current_preview_floor > 0) { |
| 479 | + | current_preview_floor--; |
| 480 | + | UpdateFloorLabel(); |
| 481 | + | UpdatePreviewFloor(); |
| 482 | + | } |
| 483 | + | } |
| 484 | + | |
| 485 | + | void OTMapGenDialog::OnFloorDown(wxCommandEvent& event) { |
| 486 | + | if (current_preview_floor < 7) { // Only go up to floor 7 |
| 487 | + | current_preview_floor++; |
| 488 | + | UpdateFloorLabel(); |
| 489 | + | UpdatePreviewFloor(); |
| 490 | + | } |
| 491 | + | } |
| 492 | + | |
| 493 | + | void OTMapGenDialog::OnZoomIn(wxCommandEvent& event) { |
| 494 | + | if (current_zoom < 4.0) { // Max zoom 400% |
| 495 | + | current_zoom *= 1.25; // 25% increase |
| 496 | + | UpdateZoomLabel(); |
| 497 | + | UpdatePreviewFloor(); |
| 498 | + | } |
| 499 | + | } |
| 500 | + | |
| 501 | + | void OTMapGenDialog::OnZoomOut(wxCommandEvent& event) { |
| 502 | + | if (current_zoom > 0.25) { // Min zoom 25% |
| 503 | + | current_zoom /= 1.25; // 25% decrease |
| 504 | + | UpdateZoomLabel(); |
| 505 | + | UpdatePreviewFloor(); |
| 506 | + | } |
| 507 | + | } |
| 508 | + | |
| 509 | + | void OTMapGenDialog::UpdatePreview() { |
| 510 | + | preview_button->SetLabel("Generating..."); |
| 511 | + | preview_button->Enable(false); |
| 512 | + | |
| 513 | + | try { |
| 514 | + | // Create configuration from dialog values |
| 515 | + | GenerationConfig config = BuildGenerationConfig(); |
| 516 | + | |
| 517 | + | // Generate preview using C++ implementation |
| 518 | + | OTMapGenerator generator; |
| 519 | + | current_layers = generator.generateLayers(config); |
| 520 | + | |
| 521 | + | // Update the preview for the current floor |
| 522 | + | UpdatePreviewFloor(); |
| 523 | + | |
| 524 | + | } catch (const std::exception& e) { |
| 525 | + | wxMessageBox(wxString::Format("Failed to generate preview: %s", e.what()), "Preview Error", wxOK | wxICON_ERROR); |
| 526 | + | } |
| 527 | + | |
| 528 | + | preview_button->SetLabel("Generate Preview"); |
| 529 | + | preview_button->Enable(true); |
| 530 | + | } |
| 531 | + | |
| 532 | + | void OTMapGenDialog::UpdatePreviewFloor() { |
| 533 | + | if (current_layers.empty()) { |
| 534 | + | return; // No data to preview |
| 535 | + | } |
| 536 | + | |
| 537 | + | try { |
| 538 | + | // Create configuration for scaling |
| 539 | + | GenerationConfig config = BuildGenerationConfig(); |
| 540 | + | |
| 541 | + | // Use the SAME mapping as OTBM generation: |
| 542 | + | // Preview floor 7 = layers[0] (ground level) |
| 543 | + | // Preview floor 6 = layers[1] (above ground 1) |
| 544 | + | // ... |
| 545 | + | // Preview floor 0 = layers[7] (highest above ground) |
| 546 | + | int layerIndex = 7 - current_preview_floor; |
| 547 | + | |
| 548 | + | // Clamp to valid range |
| 549 | + | layerIndex = std::max(0, std::min(7, layerIndex)); |
| 550 | + | |
| 551 | + | if (layerIndex < static_cast<int>(current_layers.size()) && !current_layers[layerIndex].empty()) { |
| 552 | + | const auto& layerData = current_layers[layerIndex]; |
| 553 | + | int preview_width = 400; // Updated to match the larger preview |
| 554 | + | int preview_height = 400; // Updated to match the larger preview |
| 555 | + | wxImage preview_image(preview_width, preview_height); |
| 556 | + | |
| 557 | + | // Calculate zoom-adjusted scale and center point |
| 558 | + | double base_scale_x = (double)config.width / preview_width; |
| 559 | + | double base_scale_y = (double)config.height / preview_height; |
| 560 | + | |
| 561 | + | // Apply zoom - higher zoom means smaller scale (show less area) |
| 562 | + | double scale_x = base_scale_x / current_zoom; |
| 563 | + | double scale_y = base_scale_y / current_zoom; |
| 564 | + | |
| 565 | + | // Calculate center offset for zoomed view |
| 566 | + | int center_x = config.width / 2 + preview_offset_x; |
| 567 | + | int center_y = config.height / 2 + preview_offset_y; |
| 568 | + | |
| 569 | + | for (int y = 0; y < preview_height; ++y) { |
| 570 | + | for (int x = 0; x < preview_width; ++x) { |
| 571 | + | // Calculate source coordinates with zoom and offset |
| 572 | + | int src_x = center_x + (int)((x - preview_width/2) * scale_x); |
| 573 | + | int src_y = center_y + (int)((y - preview_height/2) * scale_y); |
| 574 | + | |
| 575 | + | // Set default color (black for out of bounds) |
| 576 | + | unsigned char r = 0, g = 0, b = 0; |
| 577 | + | |
| 578 | + | if (src_x >= 0 && src_x < config.width && src_y >= 0 && src_y < config.height) { |
| 579 | + | // Calculate index in the 1D layer |
| 580 | + | int tileIndex = src_y * config.width + src_x; |
| 581 | + | |
| 582 | + | if (tileIndex < static_cast<int>(layerData.size())) { |
| 583 | + | uint16_t tileId = layerData[tileIndex]; |
| 584 | + | |
| 585 | + | // Convert tile ID to color for preview |
| 586 | + | GetTilePreviewColor(tileId, r, g, b); |
| 587 | + | } |
| 588 | + | } |
| 589 | + | |
| 590 | + | preview_image.SetRGB(x, y, r, g, b); |
| 591 | + | } |
| 592 | + | } |
| 593 | + | |
| 594 | + | if (current_preview) { |
| 595 | + | delete current_preview; |
| 596 | + | } |
| 597 | + | current_preview = new wxBitmap(preview_image); |
| 598 | + | preview_bitmap->SetBitmap(*current_preview); |
| 599 | + | preview_bitmap->Refresh(); |
| 600 | + | } |
| 601 | + | |
| 602 | + | } catch (const std::exception& e) { |
| 603 | + | wxMessageBox(wxString::Format("Failed to update preview floor: %s", e.what()), "Preview Error", wxOK | wxICON_ERROR); |
| 604 | + | } |
| 605 | + | } |
| 606 | + | |
| 607 | + | void OTMapGenDialog::UpdateFloorLabel() { |
| 608 | + | wxString label; |
| 609 | + | if (current_preview_floor == 7) { |
| 610 | + | label = "Floor: 7 (Ground)"; |
| 611 | + | } else if (current_preview_floor < 7) { |
| 612 | + | label = wxString::Format("Floor: %d (Above Ground %d)", current_preview_floor, 7 - current_preview_floor); |
| 613 | + | } else { |
| 614 | + | label = wxString::Format("Floor: %d", current_preview_floor); |
| 615 | + | } |
| 616 | + | floor_label->SetLabel(label); |
| 617 | + | } |
| 618 | + | |
| 619 | + | void OTMapGenDialog::UpdateZoomLabel() { |
| 620 | + | wxString label = wxString::Format("Zoom: %.0f%%", current_zoom * 100); |
| 621 | + | zoom_label->SetLabel(label); |
| 622 | + | } |
| 623 | + | |
| 624 | + | bool OTMapGenDialog::GenerateMap() { |
| 625 | + | try { |
| 626 | + | // Create configuration from dialog values |
| 627 | + | GenerationConfig config = BuildGenerationConfig(); |
| 628 | + | |
| 629 | + | wxProgressDialog progress("Generating Map", "Please wait while the map is being generated...", 100, this, wxPD_AUTO_HIDE | wxPD_APP_MODAL | wxPD_CAN_ABORT); |
| 630 | + | progress.Pulse(); |
| 631 | + | |
| 632 | + | // Generate the map data using C++ implementation |
| 633 | + | OTMapGenerator generator; |
| 634 | + | auto layers = generator.generateLayers(config); |
| 635 | + | |
| 636 | + | if (layers.empty()) { |
| 637 | + | wxMessageBox("Failed to generate map data.", "Generation Error", wxOK | wxICON_ERROR); |
| 638 | + | return false; |
| 639 | + | } |
| 640 | + | |
| 641 | + | // Create a temporary map to hold our generated content |
| 642 | + | Map tempMap; |
| 643 | + | tempMap.setWidth(config.width); |
| 644 | + | tempMap.setHeight(config.height); |
| 645 | + | tempMap.setName("Generated Map"); |
| 646 | + | tempMap.setMapDescription("Procedurally generated map"); |
| 647 | + | |
| 648 | + | // Set map properties |
| 649 | + | tempMap.setSpawnFilename(""); |
| 650 | + | tempMap.setHouseFilename(""); |
| 651 | + | |
| 652 | + | // Place generated tiles into the temporary map |
| 653 | + | // Floor mapping for Tibia coordinates: |
| 654 | + | // - Floor 7 = ground level (surface) ← layers[0] should go here |
| 655 | + | // - Floors 6-0 = above ground (6 is just above surface, 0 is highest) ← layers[1-7] go here |
| 656 | + | // |
| 657 | + | // We need to REVERSE the mapping when writing to OTBM: |
| 658 | + | // - layers[0] → Tibia floor 7 (ground level) |
| 659 | + | // - layers[1] → Tibia floor 6 (above ground level 1) |
| 660 | + | // - layers[7] → Tibia floor 0 (highest above ground) |
| 661 | + | |
| 662 | + | for (int layerIndex = 0; layerIndex < static_cast<int>(layers.size()) && layerIndex < 8; ++layerIndex) { |
| 663 | + | // REVERSE the mapping: layers[0]→floor 7, layers[1]→floor 6, ..., layers[7]→floor 0 |
| 664 | + | int tibiaZ = 7 - layerIndex; // This puts ground level (layers[0]) at floor 7 |
| 665 | + | |
| 666 | + | // Extract tiles from the 1D layer data |
| 667 | + | const auto& layerData = layers[layerIndex]; |
| 668 | + | int tileIndex = 0; |
| 669 | + | |
| 670 | + | for (int y = 0; y < config.height; ++y) { |
| 671 | + | for (int x = 0; x < config.width; ++x) { |
| 672 | + | if (tileIndex >= static_cast<int>(layerData.size())) { |
| 673 | + | break; // Safety check |
| 674 | + | } |
| 675 | + | |
| 676 | + | uint16_t tileId = layerData[tileIndex++]; |
| 677 | + | if (tileId != 0) { |
| 678 | + | Position pos(x, y, tibiaZ); |
| 679 | + | |
| 680 | + | // Create tile in temp map using the safe method |
| 681 | + | TileLocation* location = tempMap.createTileL(pos); |
| 682 | + | Tile* tile = tempMap.allocator(location); |
| 683 | + | |
| 684 | + | // Create ground item |
| 685 | + | Item* groundItem = Item::Create(tileId); |
| 686 | + | if (groundItem) { |
| 687 | + | tile->ground = groundItem; |
| 688 | + | tempMap.setTile(pos, tile); |
| 689 | + | } else { |
| 690 | + | delete tile; // Clean up if item creation failed |
| 691 | + | } |
| 692 | + | } |
| 693 | + | } |
| 694 | + | } |
| 695 | + | } |
| 696 | + | |
| 697 | + | // Add decorations if enabled (only on surface level - Tibia Z=7) |
| 698 | + | if (!config.terrain_only && layers.size() >= 8) { |
| 699 | + | std::mt19937 decoration_rng(std::hash<std::string>{}(config.seed)); |
| 700 | + | std::uniform_real_distribution<double> dist(0.0, 1.0); |
| 701 | + | |
| 702 | + | // Use the ground level layer (layers[0] will become Tibia floor 7) |
| 703 | + | const auto& surfaceLayer = layers[0]; |
| 704 | + | int tileIndex = 0; |
| 705 | + | |
| 706 | + | for (int y = 0; y < config.height; ++y) { |
| 707 | + | for (int x = 0; x < config.width; ++x) { |
| 708 | + | if (tileIndex >= static_cast<int>(surfaceLayer.size())) { |
| 709 | + | break; // Safety check |
| 710 | + | } |
| 711 | + | |
| 712 | + | uint16_t tileId = surfaceLayer[tileIndex++]; |
| 713 | + | if (tileId == 4526 && dist(decoration_rng) < 0.03) { // Use grass item ID directly |
| 714 | + | Position pos(x, y, 7); // Surface level in Tibia coordinates |
| 715 | + | Tile* tile = tempMap.getTile(pos); |
| 716 | + | if (tile) { |
| 717 | + | // Choose random decoration |
| 718 | + | uint16_t decorationId; |
| 719 | + | double rand_val = dist(decoration_rng); |
| 720 | + | if (rand_val < 0.6) { |
| 721 | + | decorationId = 2700; // Tree ID |
| 722 | + | } else if (rand_val < 0.8) { |
| 723 | + | decorationId = 2785; // Bush ID |
| 724 | + | } else { |
| 725 | + | decorationId = 2782; // Flower ID |
| 726 | + | } |
| 727 | + | |
| 728 | + | Item* decoration = Item::Create(decorationId); |
| 729 | + | if (decoration) { |
| 730 | + | tile->addItem(decoration); |
| 731 | + | } |
| 732 | + | } |
| 733 | + | } |
| 734 | + | } |
| 735 | + | } |
| 736 | + | } |
| 737 | + | |
| 738 | + | // Create a temporary OTBM file |
| 739 | + | wxString tempDir = wxStandardPaths::Get().GetTempDir(); |
| 740 | + | wxString tempFileName = wxString::Format("generated_map_%ld.otbm", wxGetLocalTime()); |
| 741 | + | wxString tempFilePath = tempDir + wxFileName::GetPathSeparator() + tempFileName; |
| 742 | + | |
| 743 | + | // Save the temporary map as OTBM |
| 744 | + | progress.SetLabel("Saving temporary map file..."); |
| 745 | + | |
| 746 | + | // Use the map's save functionality |
| 747 | + | bool saveSuccess = false; |
| 748 | + | try { |
| 749 | + | IOMapOTBM mapLoader(tempMap.getVersion()); |
| 750 | + | saveSuccess = mapLoader.saveMap(tempMap, wxFileName(tempFilePath)); |
| 751 | + | } catch (...) { |
| 752 | + | saveSuccess = false; |
| 753 | + | } |
| 754 | + | |
| 755 | + | if (!saveSuccess) { |
| 756 | + | wxMessageBox("Failed to save temporary map file.", "Save Error", wxOK | wxICON_ERROR); |
| 757 | + | return false; |
| 758 | + | } |
| 759 | + | |
| 760 | + | progress.SetLabel("Loading generated map..."); |
| 761 | + | progress.Pulse(); |
| 762 | + | |
| 763 | + | // Load the temporary file into the editor |
| 764 | + | bool loadSuccess = false; |
| 765 | + | try { |
| 766 | + | // Use the GUI's LoadMap function which handles everything properly |
| 767 | + | loadSuccess = g_gui.LoadMap(wxFileName(tempFilePath)); |
| 768 | + | } catch (...) { |
| 769 | + | loadSuccess = false; |
| 770 | + | } |
| 771 | + | |
| 772 | + | // Clean up the temporary file |
| 773 | + | if (wxFileExists(tempFilePath)) { |
| 774 | + | wxRemoveFile(tempFilePath); |
| 775 | + | } |
| 776 | + | |
| 777 | + | if (loadSuccess) { |
| 778 | + | wxMessageBox("Procedural map generated and loaded successfully!", "Success", wxOK | wxICON_INFORMATION); |
| 779 | + | return true; |
| 780 | + | } else { |
| 781 | + | wxMessageBox("Failed to load the generated map.", "Load Error", wxOK | wxICON_ERROR); |
| 782 | + | return false; |
| 783 | + | } |
| 784 | + | |
| 785 | + | } catch (const std::exception& e) { |
| 786 | + | wxMessageBox(wxString::Format("Map generation failed with error: %s", e.what()), "Generation Error", wxOK | wxICON_ERROR); |
| 787 | + | } |
| 788 | + | |
| 789 | + | return false; |
| 790 | + | } |
| 791 | + | |
| 792 | + | GenerationConfig OTMapGenDialog::BuildGenerationConfig() { |
| 793 | + | GenerationConfig config; |
| 794 | + | |
| 795 | + | // Basic parameters |
| 796 | + | config.seed = seed_text_ctrl->GetValue().ToStdString(); |
| 797 | + | config.width = width_spin_ctrl->GetValue(); |
| 798 | + | config.height = height_spin_ctrl->GetValue(); |
| 799 | + | config.version = version_choice->GetStringSelection().ToStdString(); |
| 800 | + | config.mountain_type = mountain_type_choice->GetStringSelection().ToStdString(); |
| 801 | + | |
| 802 | + | // Boolean flags |
| 803 | + | config.terrain_only = terrain_only_checkbox->GetValue(); |
| 804 | + | config.sand_biome = sand_biome_checkbox->GetValue(); |
| 805 | + | config.smooth_coastline = smooth_coastline_checkbox->GetValue(); |
| 806 | + | config.add_caves = add_caves_checkbox->GetValue(); |
| 807 | + | |
| 808 | + | // Advanced parameters - parse text inputs with enhanced validation and ranges |
| 809 | + | double noise_increment = 1.0; |
| 810 | + | double island_distance = 0.92; |
| 811 | + | double cave_depth = 20.0; |
| 812 | + | double cave_roughness = 0.45; |
| 813 | + | double cave_chance = 0.09; |
| 814 | + | double water_level = 7.0; |
| 815 | + | double exponent = 1.4; |
| 816 | + | double linear = 6.0; |
| 817 | + | |
| 818 | + | if (!noise_increment_text->GetValue().ToDouble(&noise_increment)) noise_increment = 1.0; |
| 819 | + | if (!island_distance_text->GetValue().ToDouble(&island_distance)) island_distance = 0.92; |
| 820 | + | if (!cave_depth_text->GetValue().ToDouble(&cave_depth)) cave_depth = 20.0; |
| 821 | + | if (!cave_roughness_text->GetValue().ToDouble(&cave_roughness)) cave_roughness = 0.45; |
| 822 | + | if (!cave_chance_text->GetValue().ToDouble(&cave_chance)) cave_chance = 0.09; |
| 823 | + | if (!water_level_text->GetValue().ToDouble(&water_level)) water_level = 7.0; |
| 824 | + | if (!exponent_text->GetValue().ToDouble(&exponent)) exponent = 1.4; |
| 825 | + | if (!linear_text->GetValue().ToDouble(&linear)) linear = 6.0; |
| 826 | + | |
| 827 | + | // Apply enhanced bounds checking with expanded ranges |
| 828 | + | noise_increment = std::max(0.001, std::min(100.0, noise_increment)); |
| 829 | + | island_distance = std::max(0.001, std::min(100.0, island_distance)); |
| 830 | + | cave_depth = std::max(1.0, std::min(100.0, cave_depth)); |
| 831 | + | cave_roughness = std::max(0.001, std::min(100.0, cave_roughness)); |
| 832 | + | cave_chance = std::max(0.001, std::min(1.0, cave_chance)); |
| 833 | + | water_level = std::max(0.0, std::min(15.0, water_level)); |
| 834 | + | exponent = std::max(0.001, std::min(100.0, exponent)); |
| 835 | + | linear = std::max(0.001, std::min(100.0, linear)); |
| 836 | + | |
| 837 | + | config.noise_increment = noise_increment; |
| 838 | + | config.island_distance_decrement = island_distance; |
| 839 | + | config.cave_depth = (int)cave_depth; |
| 840 | + | config.cave_roughness = cave_roughness; |
| 841 | + | config.cave_chance = cave_chance; |
| 842 | + | config.water_level = (int)water_level; |
| 843 | + | config.exponent = exponent; |
| 844 | + | config.linear = linear; |
| 845 | + | |
| 846 | + | // Add some default frequency settings for better island generation |
| 847 | + | config.frequencies.clear(); |
| 848 | + | config.frequencies.push_back({1.0, 1.0}); // Base frequency |
| 849 | + | config.frequencies.push_back({2.0, 0.5}); // Higher frequency, lower weight |
| 850 | + | config.frequencies.push_back({4.0, 0.25}); // Even higher, even lower weight |
| 851 | + | config.frequencies.push_back({8.0, 0.125}); // Finest detail |
| 852 | + | |
| 853 | + | // Enhanced island generation parameters |
| 854 | + | config.euclidean = true; // Use euclidean distance for smoother island shapes |
| 855 | + | config.island_distance_exponent = 2.0; // Smooth falloff |
| 856 | + | |
| 857 | + | // Use the working terrain layers from the layout design tab |
| 858 | + | config.terrain_layers = working_terrain_layers; |
| 859 | + | |
| 860 | + | // Update the sand biome layer's enabled state based on checkbox |
| 861 | + | for (auto& layer : config.terrain_layers) { |
| 862 | + | if (layer.name == "Sand") { |
| 863 | + | layer.enabled = config.sand_biome; |
| 864 | + | } |
| 865 | + | } |
| 866 | + | |
| 867 | + | // Cave configuration |
| 868 | + | int caveSelection = cave_brush_choice->GetSelection(); |
| 869 | + | if (caveSelection >= 0 && caveSelection < static_cast<int>(available_brushes.size())) { |
| 870 | + | config.cave_brush_name = available_brushes[caveSelection]; |
| 871 | + | } |
| 872 | + | config.cave_item_id = cave_item_id_spin->GetValue(); |
| 873 | + | |
| 874 | + | // Water configuration |
| 875 | + | int waterSelection = water_brush_choice->GetSelection(); |
| 876 | + | if (waterSelection >= 0 && waterSelection < static_cast<int>(available_brushes.size())) { |
| 877 | + | config.water_brush_name = available_brushes[waterSelection]; |
| 878 | + | } |
| 879 | + | config.water_item_id = water_item_id_spin->GetValue(); |
| 880 | + | |
| 881 | + | return config; |
| 882 | + | } |
| 883 | + | |
| 884 | + | // Terrain layer management event handlers |
| 885 | + | void OTMapGenDialog::OnTerrainLayerSelect(wxListEvent& event) { |
| 886 | + | UpdateLayerControls(); |
| 887 | + | } |
| 888 | + | |
| 889 | + | void OTMapGenDialog::OnTerrainLayerAdd(wxCommandEvent& event) { |
| 890 | + | TerrainLayer newLayer; |
| 891 | + | newLayer.name = "New Layer"; |
| 892 | + | newLayer.brush_name = "grass"; |
| 893 | + | newLayer.item_id = 4526; |
| 894 | + | newLayer.height_min = 0.0; |
| 895 | + | newLayer.height_max = 1.0; |
| 896 | + | newLayer.moisture_min = -1.0; |
| 897 | + | newLayer.moisture_max = 1.0; |
| 898 | + | newLayer.noise_scale = 1.0; |
| 899 | + | newLayer.coverage = 1.0; |
| 900 | + | newLayer.use_borders = true; |
| 901 | + | newLayer.enabled = true; |
| 902 | + | newLayer.z_order = 1000; |
| 903 | + | |
| 904 | + | working_terrain_layers.push_back(newLayer); |
| 905 | + | PopulateTerrainLayerList(); |
| 906 | + | |
| 907 | + | // Select the new layer |
| 908 | + | terrain_layer_list->SetItemState(working_terrain_layers.size() - 1, wxLIST_STATE_SELECTED, wxLIST_STATE_SELECTED); |
| 909 | + | UpdateLayerControls(); |
| 910 | + | } |
| 911 | + | |
| 912 | + | void OTMapGenDialog::OnTerrainLayerRemove(wxCommandEvent& event) { |
| 913 | + | long selected = terrain_layer_list->GetNextItem(-1, wxLIST_NEXT_ALL, wxLIST_STATE_SELECTED); |
| 914 | + | if (selected >= 0 && selected < static_cast<long>(working_terrain_layers.size())) { |
| 915 | + | working_terrain_layers.erase(working_terrain_layers.begin() + selected); |
| 916 | + | PopulateTerrainLayerList(); |
| 917 | + | UpdateLayerControls(); |
| 918 | + | } |
| 919 | + | } |
| 920 | + | |
| 921 | + | void OTMapGenDialog::OnTerrainLayerMoveUp(wxCommandEvent& event) { |
| 922 | + | long selected = terrain_layer_list->GetNextItem(-1, wxLIST_NEXT_ALL, wxLIST_STATE_SELECTED); |
| 923 | + | if (selected > 0 && selected < static_cast<long>(working_terrain_layers.size())) { |
| 924 | + | std::swap(working_terrain_layers[selected], working_terrain_layers[selected - 1]); |
| 925 | + | PopulateTerrainLayerList(); |
| 926 | + | terrain_layer_list->SetItemState(selected - 1, wxLIST_STATE_SELECTED, wxLIST_STATE_SELECTED); |
| 927 | + | UpdateLayerControls(); |
| 928 | + | } |
| 929 | + | } |
| 930 | + | |
| 931 | + | void OTMapGenDialog::OnTerrainLayerMoveDown(wxCommandEvent& event) { |
| 932 | + | long selected = terrain_layer_list->GetNextItem(-1, wxLIST_NEXT_ALL, wxLIST_STATE_SELECTED); |
| 933 | + | if (selected >= 0 && selected < static_cast<long>(working_terrain_layers.size()) - 1) { |
| 934 | + | std::swap(working_terrain_layers[selected], working_terrain_layers[selected + 1]); |
| 935 | + | PopulateTerrainLayerList(); |
| 936 | + | terrain_layer_list->SetItemState(selected + 1, wxLIST_STATE_SELECTED, wxLIST_STATE_SELECTED); |
| 937 | + | UpdateLayerControls(); |
| 938 | + | } |
| 939 | + | } |
| 940 | + | |
| 941 | + | void OTMapGenDialog::OnTerrainLayerEdit(wxCommandEvent& event) { |
| 942 | + | // Save current layer properties back to the selected layer |
| 943 | + | TerrainLayer* layer = GetSelectedLayer(); |
| 944 | + | if (layer) { |
| 945 | + | layer->name = layer_name_text->GetValue().ToStdString(); |
| 946 | + | |
| 947 | + | int brushSelection = layer_brush_choice->GetSelection(); |
| 948 | + | if (brushSelection >= 0 && brushSelection < static_cast<int>(available_brushes.size())) { |
| 949 | + | layer->brush_name = available_brushes[brushSelection]; |
| 950 | + | } |
| 951 | + | |
| 952 | + | layer->item_id = layer_item_id_spin->GetValue(); |
| 953 | + | |
| 954 | + | double height_min, height_max, moisture_min, moisture_max, noise_scale, coverage; |
| 955 | + | if (height_min_text->GetValue().ToDouble(&height_min)) layer->height_min = height_min; |
| 956 | + | if (height_max_text->GetValue().ToDouble(&height_max)) layer->height_max = height_max; |
| 957 | + | if (moisture_min_text->GetValue().ToDouble(&moisture_min)) layer->moisture_min = moisture_min; |
| 958 | + | if (moisture_max_text->GetValue().ToDouble(&moisture_max)) layer->moisture_max = moisture_max; |
| 959 | + | if (noise_scale_text->GetValue().ToDouble(&noise_scale)) layer->noise_scale = noise_scale; |
| 960 | + | if (coverage_text->GetValue().ToDouble(&coverage)) layer->coverage = coverage; |
| 961 | + | |
| 962 | + | layer->use_borders = use_borders_checkbox->GetValue(); |
| 963 | + | layer->enabled = layer_enabled_checkbox->GetValue(); |
| 964 | + | layer->z_order = z_order_spin->GetValue(); |
| 965 | + | |
| 966 | + | PopulateTerrainLayerList(); |
| 967 | + | } |
| 968 | + | } |
| 969 | + | |
| 970 | + | void OTMapGenDialog::OnBrushChoice(wxCommandEvent& event) { |
| 971 | + | // Auto-update item ID when brush is changed |
| 972 | + | wxChoice* choice = dynamic_cast<wxChoice*>(event.GetEventObject()); |
| 973 | + | if (choice) { |
| 974 | + | int selection = choice->GetSelection(); |
| 975 | + | if (selection >= 0 && selection < static_cast<int>(available_brushes.size())) { |
| 976 | + | wxString brushName = available_brushes[selection]; |
| 977 | + | |
| 978 | + | // Try to get the primary item ID from the brush (placeholder - needs implementation) |
| 979 | + | // For now, use some default mappings based on brush name |
| 980 | + | uint16_t itemId = 100; // Default |
| 981 | + | if (brushName == "grass") itemId = 4526; |
| 982 | + | else if (brushName == "sea") itemId = 4608; |
| 983 | + | else if (brushName == "sand") itemId = 231; |
| 984 | + | else if (brushName == "mountain") itemId = 919; |
| 985 | + | else if (brushName == "cave") itemId = 351; |
| 986 | + | else if (brushName == "snow") itemId = 670; |
| 987 | + | else if (brushName == "stone") itemId = 1284; |
| 988 | + | |
| 989 | + | if (choice->GetId() == ID_LAYER_BRUSH_CHOICE) { |
| 990 | + | layer_item_id_spin->SetValue(itemId); |
| 991 | + | } else if (choice->GetId() == ID_CAVE_BRUSH_CHOICE) { |
| 992 | + | cave_item_id_spin->SetValue(itemId); |
| 993 | + | } else if (choice->GetId() == ID_WATER_BRUSH_CHOICE) { |
| 994 | + | water_item_id_spin->SetValue(itemId); |
| 995 | + | } |
| 996 | + | } |
| 997 | + | } |
| 998 | + | } |
| 999 | + | |
| 1000 | + | void OTMapGenDialog::OnItemIdChange(wxCommandEvent& event) { |
| 1001 | + | // Item ID changed - could trigger preview update |
| 1002 | + | } |
| 1003 | + | |
| 1004 | + | // Helper functions for terrain layer management |
| 1005 | + | void OTMapGenDialog::PopulateTerrainLayerList() { |
| 1006 | + | terrain_layer_list->DeleteAllItems(); |
| 1007 | + | |
| 1008 | + | for (size_t i = 0; i < working_terrain_layers.size(); ++i) { |
| 1009 | + | const TerrainLayer& layer = working_terrain_layers[i]; |
| 1010 | + | |
| 1011 | + | long index = terrain_layer_list->InsertItem(i, layer.name); |
| 1012 | + | terrain_layer_list->SetItem(index, 1, layer.brush_name); |
| 1013 | + | terrain_layer_list->SetItem(index, 2, wxString::Format("%d", layer.item_id)); |
| 1014 | + | terrain_layer_list->SetItem(index, 3, wxString::Format("%.1f-%.1f", layer.height_min, layer.height_max)); |
| 1015 | + | terrain_layer_list->SetItem(index, 4, layer.enabled ? "Yes" : "No"); |
| 1016 | + | } |
| 1017 | + | } |
| 1018 | + | |
| 1019 | + | void OTMapGenDialog::PopulateBrushChoices() { |
| 1020 | + | // Populate with common brush names from grounds.xml |
| 1021 | + | // This should be replaced with actual brush parsing from the XML files |
| 1022 | + | available_brushes.clear(); |
| 1023 | + | available_brushes.push_back("grass"); |
| 1024 | + | available_brushes.push_back("sea"); |
| 1025 | + | available_brushes.push_back("sand"); |
| 1026 | + | available_brushes.push_back("mountain"); |
| 1027 | + | available_brushes.push_back("cave"); |
| 1028 | + | available_brushes.push_back("snow"); |
| 1029 | + | available_brushes.push_back("stone floor"); |
| 1030 | + | available_brushes.push_back("wooden floor"); |
| 1031 | + | available_brushes.push_back("lawn"); |
| 1032 | + | available_brushes.push_back("ice"); |
| 1033 | + | |
| 1034 | + | // Populate all brush choice controls |
| 1035 | + | layer_brush_choice->Clear(); |
| 1036 | + | cave_brush_choice->Clear(); |
| 1037 | + | water_brush_choice->Clear(); |
| 1038 | + | |
| 1039 | + | for (const std::string& brush : available_brushes) { |
| 1040 | + | layer_brush_choice->Append(brush); |
| 1041 | + | cave_brush_choice->Append(brush); |
| 1042 | + | water_brush_choice->Append(brush); |
| 1043 | + | } |
| 1044 | + | |
| 1045 | + | // Set default selections |
| 1046 | + | cave_brush_choice->SetStringSelection("cave"); |
| 1047 | + | water_brush_choice->SetStringSelection("sea"); |
| 1048 | + | } |
| 1049 | + | |
| 1050 | + | void OTMapGenDialog::UpdateLayerControls() { |
| 1051 | + | TerrainLayer* layer = GetSelectedLayer(); |
| 1052 | + | bool hasSelection = (layer != nullptr); |
| 1053 | + | |
| 1054 | + | // Enable/disable controls based on selection |
| 1055 | + | layer_properties_panel->Enable(hasSelection); |
| 1056 | + | remove_layer_button->Enable(hasSelection); |
| 1057 | + | edit_layer_button->Enable(hasSelection); |
| 1058 | + | |
| 1059 | + | long selected = terrain_layer_list->GetNextItem(-1, wxLIST_NEXT_ALL, wxLIST_STATE_SELECTED); |
| 1060 | + | move_up_button->Enable(hasSelection && selected > 0); |
| 1061 | + | move_down_button->Enable(hasSelection && selected < static_cast<long>(working_terrain_layers.size()) - 1); |
| 1062 | + | |
| 1063 | + | if (hasSelection) { |
| 1064 | + | SetSelectedLayer(*layer); |
| 1065 | + | } else { |
| 1066 | + | // Clear controls |
| 1067 | + | layer_name_text->SetValue(""); |
| 1068 | + | layer_brush_choice->SetSelection(-1); |
| 1069 | + | layer_item_id_spin->SetValue(100); |
| 1070 | + | height_min_text->SetValue("0.0"); |
| 1071 | + | height_max_text->SetValue("1.0"); |
| 1072 | + | moisture_min_text->SetValue("-1.0"); |
| 1073 | + | moisture_max_text->SetValue("1.0"); |
| 1074 | + | noise_scale_text->SetValue("1.0"); |
| 1075 | + | coverage_text->SetValue("1.0"); |
| 1076 | + | use_borders_checkbox->SetValue(false); |
| 1077 | + | layer_enabled_checkbox->SetValue(false); |
| 1078 | + | z_order_spin->SetValue(1000); |
| 1079 | + | } |
| 1080 | + | } |
| 1081 | + | |
| 1082 | + | TerrainLayer* OTMapGenDialog::GetSelectedLayer() { |
| 1083 | + | long selected = terrain_layer_list->GetNextItem(-1, wxLIST_NEXT_ALL, wxLIST_STATE_SELECTED); |
| 1084 | + | if (selected >= 0 && selected < static_cast<long>(working_terrain_layers.size())) { |
| 1085 | + | return &working_terrain_layers[selected]; |
| 1086 | + | } |
| 1087 | + | return nullptr; |
| 1088 | + | } |
| 1089 | + | |
| 1090 | + | void OTMapGenDialog::SetSelectedLayer(const TerrainLayer& layer) { |
| 1091 | + | layer_name_text->SetValue(layer.name); |
| 1092 | + | |
| 1093 | + | // Find and select the brush |
| 1094 | + | for (size_t i = 0; i < available_brushes.size(); ++i) { |
| 1095 | + | if (available_brushes[i] == layer.brush_name) { |
| 1096 | + | layer_brush_choice->SetSelection(i); |
| 1097 | + | break; |
| 1098 | + | } |
| 1099 | + | } |
| 1100 | + | |
| 1101 | + | layer_item_id_spin->SetValue(layer.item_id); |
| 1102 | + | height_min_text->SetValue(wxString::Format("%.2f", layer.height_min)); |
| 1103 | + | height_max_text->SetValue(wxString::Format("%.2f", layer.height_max)); |
| 1104 | + | moisture_min_text->SetValue(wxString::Format("%.2f", layer.moisture_min)); |
| 1105 | + | moisture_max_text->SetValue(wxString::Format("%.2f", layer.moisture_max)); |
| 1106 | + | noise_scale_text->SetValue(wxString::Format("%.2f", layer.noise_scale)); |
| 1107 | + | coverage_text->SetValue(wxString::Format("%.2f", layer.coverage)); |
| 1108 | + | use_borders_checkbox->SetValue(layer.use_borders); |
| 1109 | + | layer_enabled_checkbox->SetValue(layer.enabled); |
| 1110 | + | z_order_spin->SetValue(layer.z_order); |
| 1111 | + | } |
| 1112 | + | |
| 1113 | + | void OTMapGenDialog::GetTilePreviewColor(uint16_t tileId, unsigned char& r, unsigned char& g, unsigned char& b) { |
| 1114 | + | // First check if this tile ID matches any of our configured terrain layers |
| 1115 | + | for (const auto& layer : working_terrain_layers) { |
| 1116 | + | if (layer.item_id == tileId && layer.enabled) { |
| 1117 | + | // Use layer-specific colors based on layer name |
| 1118 | + | if (layer.name == "Water" || layer.brush_name == "sea") { |
| 1119 | + | r = 0; g = 100; b = 255; // Blue for water |
| 1120 | + | return; |
| 1121 | + | } else if (layer.name == "Grass" || layer.brush_name == "grass") { |
| 1122 | + | r = 50; g = 200; b = 50; // Green for grass |
| 1123 | + | return; |
| 1124 | + | } else if (layer.name == "Sand" || layer.brush_name == "sand") { |
| 1125 | + | r = 255; g = 255; b = 100; // Yellow for sand |
| 1126 | + | return; |
| 1127 | + | } else if (layer.name == "Mountain" || layer.brush_name == "mountain") { |
| 1128 | + | r = 139; g = 69; b = 19; // Brown for mountains |
| 1129 | + | return; |
| 1130 | + | } else if (layer.brush_name == "snow") { |
| 1131 | + | r = 255; g = 255; b = 255; // White for snow |
| 1132 | + | return; |
| 1133 | + | } else if (layer.brush_name == "cave") { |
| 1134 | + | r = 64; g = 64; b = 64; // Dark gray for caves |
| 1135 | + | return; |
| 1136 | + | } else if (layer.brush_name.find("stone") != std::string::npos) { |
| 1137 | + | r = 128; g = 128; b = 128; // Gray for stone |
| 1138 | + | return; |
| 1139 | + | } else if (layer.brush_name == "ice") { |
| 1140 | + | r = 200; g = 200; b = 255; // Light blue for ice |
| 1141 | + | return; |
| 1142 | + | } else if (layer.brush_name.find("wood") != std::string::npos) { |
| 1143 | + | r = 139; g = 69; b = 19; // Brown for wood |
| 1144 | + | return; |
| 1145 | + | } |
| 1146 | + | } |
| 1147 | + | } |
| 1148 | + | |
| 1149 | + | // Check cave and water configuration |
| 1150 | + | if (tileId == cave_item_id_spin->GetValue()) { |
| 1151 | + | r = 64; g = 64; b = 64; // Dark gray for caves |
| 1152 | + | return; |
| 1153 | + | } |
| 1154 | + | |
| 1155 | + | if (tileId == water_item_id_spin->GetValue()) { |
| 1156 | + | r = 0; g = 100; b = 255; // Blue for water |
| 1157 | + | return; |
| 1158 | + | } |
| 1159 | + | |
| 1160 | + | // Fallback: Convert tile ID to preview colors using common item IDs |
| 1161 | + | switch (tileId) { |
| 1162 | + | case 4608: case 4609: case 4610: case 4611: case 4612: case 4613: |
| 1163 | + | r = 0; g = 100; b = 255; // Blue for water |
| 1164 | + | break; |
| 1165 | + | case 4526: case 4527: case 4528: case 4529: case 4530: |
| 1166 | + | r = 50; g = 200; b = 50; // Green for grass |
| 1167 | + | break; |
| 1168 | + | case 231: |
| 1169 | + | r = 255; g = 255; b = 100; // Yellow for sand |
| 1170 | + | break; |
| 1171 | + | case 1284: case 431: |
| 1172 | + | r = 128; g = 128; b = 128; // Gray for stone |
| 1173 | + | break; |
| 1174 | + | case 4597: |
| 1175 | + | r = 100; g = 100; b = 100; // Dark gray for gravel |
| 1176 | + | break; |
| 1177 | + | case 670: case 671: |
| 1178 | + | r = 255; g = 255; b = 255; // White for snow |
| 1179 | + | break; |
| 1180 | + | case 919: case 4468: case 4469: |
| 1181 | + | r = 139; g = 69; b = 19; // Brown for mountains |
| 1182 | + | break; |
| 1183 | + | case 351: case 352: case 353: |
| 1184 | + | r = 64; g = 64; b = 64; // Dark gray for caves |
| 1185 | + | break; |
| 1186 | + | case 106: case 108: case 109: |
| 1187 | + | r = 0; g = 150; b = 0; // Dark green for lawn |
| 1188 | + | break; |
| 1189 | + | case 405: case 448: |
| 1190 | + | r = 139; g = 69; b = 19; // Brown for wooden floors |
| 1191 | + | break; |
| 1192 | + | default: |
| 1193 | + | r = 64; g = 64; b = 64; // Default dark gray |
| 1194 | + | break; |
| 1195 | + | } |
| 1196 | + | } |